Cfw Enabler 3.01 Free ##VERIFIED##
Download ::: https://shurll.com/2t24MM
1. Rename the PS3_Game folder of retail disc [BCUS98298] into "NPUA72074",2. Unpack the demo NPUA72074 then copy only the [eboot.bin] from it then paste into folder [USRDIR] in [NPUA72074] renamed in step 1,3. Edit PARAM.SFO of [NPUA72074] and change Category from DG Disc Game (blu-ray) to HG Harddrive Game then Save,4. Delete LICDIR folder in NPUA72074,5. Download only the v1.01 update for BCUS98298,6. Unpack contents of downloaded v1.01 update then move them to a new folder called "BCUS98298",7. For DTU: Transfer NPUA72074 and BCUS98298 folders into CFW PS3 then DTU to OFW PS3. Done.7. For HAN: Move NPUA72074 and BCUS98298 folders into make-backup-pkg directory then open/run [do.bat]. Install on HAN PS3 with [Enable Debug Packages]. Done.For Han: converted with CFW2OFW Helper v13 the game stucks at a black screen. Feel free to try with PS3GameConvert v0.91.
If you get black screen and console freeze during game startup on HEN/HAN try this method:1. Before converting, move the original files of "PS3_GAME\USRDIR" (except EBOOT.BIN, default.self, and default_mp.self) to a temp folder outside the PS3_GAME folder.2. Convert the game using CFW2OFW v1.13 ("PS3_GAME\USRDIR" should contain EBOOT.BIN, default.self, and default_mp.self files only).3. After the conversion, move the original files (the ones inside the temp folder you made in step 1) to the converted folder "BLES00687\USRDIR". (resulting NPEB00687 folder should be small, around 19-20MB in size and BLES00684 should be around 7.15GB)4. Make the packages with Make-Backup-PKG, game package will be small (19-20MB) while patch will be the biggest one (7.15GB)
Download the demo (NPEB90114) and take only the EBOOT.BIN and SPUJOBS.SPRX files from it, place them in the NPEB00052 folder and rename the folder to NPEB90114, and change the PARAM.SFO to NPEB90114. NOTE: That method sounds like unlocking NPEB00052 (PSN Full Game) to play for free. Click to 'Talk' about this method.
To download LDN3, absolutely for free, then head over to the patreon co-announcement where the builds for Windows and Linux are being hosted. You do not need to be a patreon supporter to download or use LDN, but we wouldn't be opposed if you wanted to donate!
Jboot B394JRecovery Version R1.2 2011/05/26 09:53=== 0xB0100004 = 00000000 SPI FLASH: MX25l6405d 8MCSID 6E20->6E24................Starting kernel @80000000...LINUX started... THIS IS ASICLinux version 2.6.21 (ahong@dot7) (gcc version 3.4.2) #1 Wed Sep 3 11:20:34 CST 2014 The CPU feqenuce set to 360 MHzCPU revision is: 0001964cDetermined physical RAM map: memory: 02000000 @ 00000000 (usable)Built 1 zonelists. Total pages: 8128Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.Primary data cache 16kB, 4-way, linesize 32 bytes.Synthesized TLB refill handler (20 instructions).Synthesized TLB load handler fastpath (32 instructions).Synthesized TLB store handler fastpath (32 instructions).Synthesized TLB modify handler fastpath (31 instructions).Cache parity protection disabledcause = 50808008, status = 11000000PID hash table entries: 128 (order: 7, 512 bytes)calculating r4koff... 0015f900(1440000)CPU frequency 360.00 MHzUsing 180.000 MHz high precision timer.Console: colour dummy device 80x25Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)Memory: 29228k/32768k available (2439k kernel code, 3540k reserved, 568k data, 124k init, 0k highmem)Mount-cache hash table entries: 512NET: Registered protocol family 16usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbNET: Registered protocol family 2Time: MIPS clocksource has been installed.IP route cache hash table entries: 1024 (order: 0, 4096 bytes)TCP established hash table entries: 1024 (order: 1, 8192 bytes)TCP bind hash table entries: 1024 (order: 0, 4096 bytes)TCP: Hash tables configured (established 1024 bind 1024)TCP reno registeredRT3xxx EHCI/OHCI init.squashfs: version 3.2-r2 (2007/01/15) Phillip Loughersquashfs: LZMA suppport for slax.org by jrofuse init (API version 7.8)io scheduler noop registered (default)arch_mem_init check 0xb000001c: 00000000------------------GPIO-------------------------- GPIOMODE:2dfSLIC INTR ==> gpio 1Ralink gpio driver initializedEnable Ralink GDMA Controller Module GDMA IP Version=2HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096N_HDLC line discipline registered.Serial: 8250/16550 driver $Revision: 1.7 $ 4 ports, IRQ sharing disabledserial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550Aserial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550Aloop: loaded (max 8 devices)rdm_major = 254net_speed proc file Create MAC_ADRH -- : 0x00000000MAC_ADRL -- : 0x00000000eth2 mii.o query= phy_id:0, address:1 retval:7849Ralink APSoC Ethernet Driver Initilization. v2.0 256 rx/tx descriptors allocated, mtu = 1500!MAC_ADRH -- : 0x0000000cMAC_ADRL -- : 0x432880cePROC INIT OK!=== 0xB0100004 = 00000000 Insmod eth_ping skb_diy module.PPP generic driver version 2.4.2PPP Deflate Compression module registeredPPP BSD Compression module registeredMPPE/MPPC encryption/compression module registeredNET: Registered protocol family 24PPTP driver version 0.8.1block2mtd: version $Revision: 1.1.1.1 $deice id : c2 20 17 c2 20 (2017c220)MX25L6405D(c2 2017c220) (8192 Kbytes)mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00001000 (4K) .numeraseregions = 0Creating 6 MTD partitions on "raspi":0x00000000-0x00800000 : "Whole"0x00000000-0x00010000 : "Bootloader"0x00010000-0x00150000 : "Kernel"0x00150000-0x00710000 : "RootFS"0x00710010-0x007f0000 : "UI"mtd: partition "UI" doesn't start on an erase block boundary -- force read-only0x007f0000-0x00800000 : "Config"u32 classifierNetfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (256 buckets, 2048 max)Register conntrack protocol helper for ESP...IPv4 over IPv4 tunneling driverGRE over IPv4 tunneling driveripgre init: can't add protocolip_conntrack version 2.4 (256 buckets, 2048 max) - 184 bytes per conntracknf_sock overlap: 0-0/80-81 v 0-0/80-81Unable to register netfilter socket optionInit IP_nat_proto_esp register. ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Conearp_tables: (C) 2002 David S. MillerTCP cubic registeredNET: Registered protocol family 1NET: Registered protocol family 10NET: Registered protocol family 17802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly.Freeing unused kernel memory: 124k freedAlgorithmics/MIPS FPU Emulator v1.5Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 tunl0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0switch reg write offset=168, value=17phy_tx_ring = 0x01c68000, tx_ring = 0xa1c68000phy_rx_ring0 = 0x01c69000, rx_ring0 = 0xa1c69000Set gpio_range = gpio2300, dir = 3e0300 flash_open: flash_fd=3Mount D Section.mount: /dev/mtdblock4 is write-protected, mounting read-only flash_open: flash_fd=10phy 4, reg 0, val 0x3900Set: phy[4].reg[0] = 3900phy 0, reg 0, val 0x3900Set: phy[0].reg[0] = 3900phy 1, reg 0, val 0x3900Set: phy[1].reg[0] = 3900phy 2, reg 0, val 0x3900Set: phy[2].reg[0] = 3900phy 3, reg 0, val 0x3900Set: phy[3].reg[0] = 3900switch reg write offset=14, value=405555switch reg write offset=50, value=2001switch reg write offset=98, value=7f3fswitch reg write offset=e4, value=3fswitch reg write offset=40, value=1001switch reg write offset=44, value=1001switch reg write offset=48, value=1002switch reg write offset=70, value=ffff506fphy 4, reg 0, val 0x3300Set: phy[4].reg[0] = 3300phy 4, reg 0, val 0x3100Set: phy[4].reg[0] = 3100phy 0, reg 0, val 0x3100Set: phy[0].reg[0] = 3100phy 1, reg 0, val 0x3100Set: phy[1].reg[0] = 3100phy 2, reg 0, val 0x3100Set: phy[2].reg[0] = 3100phy 3, reg 0, val 0x3100Set: phy[3].reg[0] = 3100eth2.1: Setting MAC address to 78 54 2e 9e 59 78.device eth2 entered promiscuous modeVLAN (eth2.1): Setting underlying device (eth2) to promiscious mode.eth2 mii.o query= phy_id:1, address:4 retval:5e1eth2 mii.o query= phy_id:1, address:0 retval:3100eth2 mii.o query= phy_id:1, address:5 retval:0eth2.1: dev_set_promiscuity(master, 1)device eth2.1 entered promiscuous modeeth2.2: Setting MAC address to 78 54 2e 9e 59 77.Init handler: lanbr0: port 1(eth2.1) entering learning stateInit handler: dhcpsrvbr0: topology change detected, propagatingbr0: port 1(eth2.1) entering forwarding stateFailure parsing line 12 of /etc/udhcpd.confserver_config.pool_check = 1server_config.pool_check = 1 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=00Unable to open /var/run/udhcpd.leases for readingudhcpd (v0.9.9-pre) startedUnable to open /var/run/udhcpd.leases for readingInit handler: stpInit handler: reset_btnInit handler: wlanap flash_open: flaramtd_erase: addr:7f0000 len:1000sh_fd=10ramtd_write: to:7f0000 len:10ramtd_write: to:7f0010 len:bd4ramtd_write: to:7f0000 len:1rt2860v2_ap: module license 'unspecified' taints kernel.Length of MAC:6 mac:71:52:23:94:55:76:----=== pAd = c0077000, size = 620552 ===
CTG561DL_0T3 Jboot B923JRecovery Version R1.2 2014/11/07 14:39spi device id: ef 40 18 0 0 (40180000)SPI FLASH: W25Q128FV 16M.MAC 01:20:13:04:5F:FE...................Starting kernel @80000000...LINUX started... THIS IS ASICLinux version 2.6.36 (jay@RD1) (gcc version 4.3.5 (Buildroot 2011.05) ) #6 Wed Mar 4 14:32:25 CST 2015CMD_LINE:console=ttyS1,57600n8 root=/dev/mtdblock3 The CPU feqenuce set to 580 MHz PCIE: bypass PCIe DLL. PCIE: Elastic buffer control: Addr:0x68 -> 0xB4 disable all power about PCIe PCIE: PLL power down for MT7620NCPU revision is: 00019650 (MIPS 24Kc)Determined physical RAM map: memory: 04000000 @ 00000000 (usable)Zone PFN ranges: Normal 0x00000000 -> 0x00004000Movable zone start PFN for each nodeearly_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00004000Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3PID hash table entries: 256 (order: -2, 1024 bytes)Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytesWriting ErrCtl register=0005ffebReadback ErrCtl register=0005ffebMemory: 61164k/65536k available (2837k kernel code, 4372k reserved, 683k data, 168k init, 0k highmem)Hierarchical RCU implementation. RCU debugfs-based tracing is enabled. Verbose stalled-CPUs detection is disabled.NR_IRQS:128Console: colour dummy device 80x25console [ttyS1] enabledCalibrating delay loop... 386.04 BogoMIPS (lpj=772096)pid_max: default: 32768 minimum: 301Mount-cache hash table entries: 512NET: Registered protocol family 16bio: create slab at 0usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbSwitching to clocksource MIPSNET: Registered protocol family 2IP route cache hash table entries: 1024 (order: 0, 4096 bytes)TCP established hash table entries: 2048 (order: 2, 16384 bytes)TCP bind hash table entries: 2048 (order: 1, 8192 bytes)TCP: Hash tables configured (established 2048 bind 2048)TCP reno registeredUDP hash table entries: 256 (order: 0, 4096 bytes)UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)NET: Registered protocol family 1RT3xxx EHCI/OHCI init.squashfs: version 4.0 (2009/01/31) Phillip Loughermsgmni has been set to 119Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)io scheduler noop registered (default)HDLC line discipline maxframe=4096N_HDLC line discipline registered.Ralink gpio driver initializedEnable Ralink GDMA Controller ModuleGDMA IP Version=3Serial: 8250/16550 driver, 2 ports, IRQ sharing disabledserial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550Aserial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550Abrd: module loadeddeice id : ef 40 18 0 0 (40180000)W25Q128BV(ef 40180000) (16384 Kbytes)mtd .name = raspi, .size = 0x01000000 (0M) .erasesize = 0x00000010 (0K) .numeraseregions = 4096Creating 6 MTD partitions on "raspi":0x000000000000-0x000001000000 : "Whole"0x000000000000-0x000000010000 : "Bootloader"0x000000010000-0x000000150000 : "Kernel"0x000000180000-0x000000f10000 : "RootFS"0x000000f10010-0x000000ff0000 : "UI"mtd: partition "UI" doesn't start on an erase block boundary -- force read-only0x000000ff0000-0x000001000000 : "Config"rdm_major = 253SMACCR1 -- : 0x0000000cSMACCR0 -- : 0x432880e1Ralink APSoC Ethernet Driver Initilization. v3.0 256 rx/tx descriptors allocated, mtu = 1500!NAPI enable, Tx Ring = 256, Rx Ring = 256SMACCR1 -- : 0x0000000cSMACCR0 -- : 0x43288064PROC INIT OK!PPP generic driver version 2.4.2PPP Deflate Compression module registeredPPP BSD Compression module registeredNET: Registered protocol family 24PPTP driver version 0.8.5ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverrt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controllerrt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00hub 1-0:1.0: USB hub foundhub 1-0:1.0: 1 port detectedohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverrt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controllerrt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000hub 2-0:1.0: USB hub foundhub 2-0:1.0: 1 port detectedu32 classifierNetfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (955 buckets, 3820 max)xt_time: kernel timezone is -0000IPv4 over IPv4 tunneling driverGRE over IPv4 demultiplexor drivergre: can't add protocolGRE over IPv4 tunneling driverip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Conearp_tables: (C) 2002 David S. MillerTCP cubic registeredNET: Registered protocol family 10IPv6 over IPv4 tunneling driverNET: Registered protocol family 17L2TP core driver, V2.0PPPoL2TP kernel driver, V2.0802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly on device 31:3.Freeing unused kernel memory: 168k freedInter-| Receive Raeth v3.0 ( NAPI ,SkbRecycle )phy_tx_ring = 0x03faf000, tx_ring = 0xa3faf000phy_rx_ring0 = 0x03fb0000, rx_ring0 = 0xa3fb0000SMACCR1 -- : 0x0000000cSMACCR0 -- : 0x43288064 CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 tunl0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gre0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 flash_open: flash_fd=3Mount D Section.mount: /dev/mtdblock4 is write-protected, mounting read-onlyaddrconf_dad_completed 7 flash_open: flash_fd=10switch register base addr to system register 0xb0000000write offset 0x60, value 0x80ddTue Jan 1 00:00:00 UTC 2013timezone:0dsttime:0switch reg write offset=2004, value=ff0003switch reg write offset=2104, value=ff0003switch reg write offset=2204, value=ff0003switch reg write offset=2304, value=ff0003switch reg write offset=2404, value=ff0003switch reg write offset=2504, value=ff0003switch reg write offset=2010, value=810000c0switch reg write offset=2110, value=810000c0switch reg write offset=2210, value=810000c0switch reg write offset=2310, value=810000c0switch reg write offset=2410, value=810000c0switch reg write offset=2510, value=810000c0switch reg write offset=2610, value=81000000switch reg write offset=2710, value=81000000switch reg write offset=2604, value=20ff0003switch reg write offset=2704, value=20ff0003switch reg write offset=2014, value=10001switch reg write offset=2114, value=10001switch reg write offset=2214, value=10001switch reg write offset=2314, value=10001switch reg write offset=2414, value=10002switch reg write offset=2514, value=10001sh: ebtables: not foundsh: ebtables: not foundsh: ebtables: not foundsh: ebtables: not foundvconfig: ioctl error for add: File existsSet port eth2.1.0vconfig: ioctl error for add: File existsdevice eth2 entered promiscuous modeset hello timer failed: Invalid argumentdevice eth2.1 entered promiscuous modesh: ebtables: not foundbr0: port 1(eth2.1) entering forwarding statebr0: port 1(eth2.1) entering forwarding stateSet port eth2.2.0vconfig: ioctl error for add: File exists, Enable: 1phy 0, reg 0, val 0x800Set: phy[0].reg[0] = 0800phy 1, reg 0, val 0x800Set: phy[1].reg[0] = 0800phy 2, reg 0, val 0x800Set: phy[2].reg[0] = 0800phy 3, reg 0, val 0x800Set: phy[3].reg[0] = 0800phy 4, reg 0, val 0x800Set: phy[4].reg[0] = 0800phy 5, reg 0, val 0x800Set: phy[5].reg[0] = 0800sh: ebtables: not foundsh: ebtables: not foundsh: ebtables: not found framtd_erase: addr:ff0000 len:0lash_open: flash_fd=10ramtd_write: to:ff0000 len:10ramtd_write: to:ff0010 len:624ramtd_write: to:ff0000 len:1phy 0, reg 0, val 0x3300Set: phy[0].reg[0] = 3300phy 1, reg 0, val 0x3300Set: phy[1].reg[0] = 3300addrconf_dad_completed 7addrconf_dad_completed 7phy 2, reg 0, val 0x3300Set: phy[2].reg[0] = 3300phy 3, reg 0, val 0x3300Set: phy[3].reg[0] = 3300addrconf_dad_completed 7phy 4, reg 0, val 0x3300Set: phy[4].reg[0] = 3300phy 5, reg 0, val 0x3300Set: phy[5].reg[0] = 3300init sysinit vlaninit laninit stpinit waninit ondemandinit multiwaninit multi_ondemandinit load_balanceinit routinginit natnat initialinit dhcpsrv==== NAT START (WAN:ALL Func:ALL) ====cat: /var/nat/nat.wan: No such file or directoryaddrconf_dad_completed 7server_config.pool_check = 1server_config.pool_check = 1 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=00Unable to open /var/run/udhcpd.leases for readingudhcpd (v0.9.9-pre) startedUnable to open /var/run/udhcpd.leases for readinginit dnsrelayinit spapinit ddnsinit snmpinit route_protocolrm: cannot remove '/etc/ripd.conf': No such file or directorycat: /var/run/ripd.pid: No such file or directoryBusyBox v1.3.2 (2015-01-26 17:23:24 CST) multi-call binaryUsage: kill [-l] [-signal] process-id [process-id ...]cat: /var/run/zebra.pid: No such file or directoryBusyBox v1.3.2 (2015-01-26 17:23:24 CST) multi-call binaryUsage: kill [-l] [-signal] process-id [process-id ...]init half_bridgeinit timetimezone:-180dsttime:0init rbydominit rbyipinit qosinit keepaliveinit user/var/nat/nat-draft.uyg: /var/nat/nat-draft.uyg: 131: cannot create /proc/sys/net/ipv4/route/secret_interval: Directory nonexistentinit ftp_alginit rtsp_alginit scheduleinit mupnpdinit watchdoginit rebootinit wireless_modeSINGLE DMZ startgre_postUsing intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).modprobe: module ip6_tables not foundmodprobe: failed to load module ip6_tablesip6tables v1.4.10: can't initialize ip6tables table `filter': iptables who? (do you need to insmod?)Perhaps ip6tables or your kernel needs to be upgraded.server_config.pool_check = 1server_config.pool_check = 1 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=00udhcpd (v0.9.9-pre) startedinit wlanapinit wps_statusinit wps_btninit wpainit pwdinit ipv6init v6filtermodprobe: module ip6_tables not foundmodprobe: failed to load module ip6_tablesmodprobe: module ip6table_filter not foundmodprobe: failed to load module ip6table_filtermodprobe: module ip6table_mangle not foundmodprobe: failed to load module ip6table_manglemodprobe: module ip6t_rt not foundmodprobe: failed to load module ip6t_rtmodprobe: module ip6t_REJECT not foundmodprobe: failed to load module ip6t_REJECTinit ddnsv6init tr069init failoverinit 3g_statusinit 3g_settinginit wan_aliasinit sip_alginit igmpinit reset_btninit atekillall: ated: no process killedinit wan_ledinit recentinit iom/usr/bin/ataskset: /usr/bin/ataskset: 6: taskset: not found flash_open: flash_fd=4 flash_open: flash_fd=4# rt2860v2_ap: module license 'unspecified' taints kernel.Disabling lock debugging due to kernel taintRalink APSoC Hardware Watchdog TimerStarted WatchDog Timer.Started WatchDog Timer. LoadVlaue: 36600 sysclk: 145000000 TIMEOUT: 60Length of MAC:6 mac:1c:2f:3b:c4:5c:6a:----=== pAd = c0dd6000, size = 1221088 === 2b1af7f3a8
Fix Connections to Bluetooth Audio Devices and Wireless Displays in Windows 10 fix connections in windows 10 just one a single click here this website.