Thought I would post a follow-up to see if anyone has heard anything from the developer on this. I just donated to support this development. Unfortunately, after donating and you're redirected to the driver download page, you learn at that moment that it only supports 32 bit. Any word on a 64-bit version? I've seen several related posts going back at least a few years and most of them seem to have been ignored by the developer.
I received my drivers and installed them successfully. However, now I get the message that they are not properly installed, even after a reinstall. All I can imagine now is that it is related to having updated RealTerm or to running with reduced (non-admin) permissions. Any ideas?
Haven't heard back. Sad because it appears the author is actively monitoring this site. If the drivers are not available anymore, then a new stable release without the donate/get drivers popup should be made the default download.
EOBD-FacileThe people that brought us the iOS version of EOBD-Facile now offer a Mac OSX version. The free download allows you to read trouble codes, while the paid version offers full functionality. See the Outils OBD Facile YouTube page for additional info.
Movi and Movi ProOnly for the Mac, there are two versions of this software. The standard version provides all the basic OBD functions, while Movi Pro adds more bells and whistles. If you just want to try it out, the download will operate in demo mode.
Tera Term is a free software utility offered by the current development team: Tera Term Project. The free download package is lightweight and does not require a lot of storage space on PC computers and laptops.
The devicetree configuration allows you to use a minimal pin configuration.Connect all unused pins to the fixed logic level as instructed in the official documentation.For example, csd-gpios is an optional pin that sets the device into sleep mode.If this pin is not controlled by the driver, it must be connected to the fixed logic level.
On the nRF5340 development kit, the physical UART interface of the application core is used for communication with the tester device.This sample uses the IPC UART driver for sending responses and receiving commands through the UART interface of the application core.
make sure you have the FDTI drivers installedmake sure you have connected the buspirate and the red led is lit if you were on preorder 2 make sure you have uploaded the firmware see this for more information -pirate-firmware-upgrades/ and =100.0 2b1af7f3a8